Exterior Painted sheet metal or brushed stainless steel.
Glass Sound control laminated glass.
FrameFormica laminate on birch plywood with varnish trim.

Solid walls and roof A sandwich element of sheet metal, birch plywood, recycled acoustic foam and acoustic felt. An anti-static and stain resistant low loop pile carpet for interior floor.
Table White Formica laminate on birch plywood with varnish trim.

Size 222 cm x 220 cm x 120 cm (h, w, d)
Table 87.4 in x 86.6 in x 47.2 in (h, w, d)
Weight 630 kg / 1389 lb (without furniture)

Pods can be used effectively to eliminate distractions and increase productivity in the workplace, but this is only achieved if they are actively used. And for pods to be actively used, they should be placed close enough to their users. This creates certain requirements especially in terms of sound insulation.

The speech level reduction (DS,A) of Framery Q is 29 dB measured according to ISO 23351-1. Pods with this level of sound insulation can be placed close to workstations in an office and people working outside them will not be able to overhear discussions inside.

No flammable materials are used in Framery products. The fire safety of all surface materials, upholstery and acoustics materials of the products is tested and classified by either national or international standards. Framery O, Q and 2Q exterior sheet metal panels and sound- control laminated glass are of such quality that they may halt heat and fire. Outer frames with laminated surface are IMO certified (French Maritime Authority). Acoustic foam used meets B-s1, d0, EN 13501-1, acoustic felt EN 13501-1 and floor carpet Bfl-s1, EN 13501-1 requirements.
Molded foam used in the Tovi stool seat meets CA TB 117:2013 requirements. Fabric used meets the performance requirements of BS EN 1021-1 and 1 021-2.
According to Inspecta, an EU accredited inspection body, there is no requirement to install sprinklers in Framery Q.

In the case of Framery pods and office booths, requirements generally refer to the products’ ability to stay upright in case of an earthquake. If needed, the products can be fixed to the floor with anchor bolts using the leveling glide screw holes in the floor modules. Instructions are available upon request.

The indoor air quality of all products is tested by an accredited testing laboratory, VTT Technical Research Centre of Finland, and is found to be well within the limits of M1 emission classification. Total air flow in the 2018 updated Framery Q pod is 66 l/s.

Framery products are mainly constructed of birch plywood. All plywood used in Framery products is produced either in Finland or neighboring countries, while all suppliers are required to have FSC or PEFC certification. A majority of the materials used are recycled or recyclable. The acoustic foam and the interior felt used in the products are up to 60–70 % recycled. A significant part of all steel, aluminium and glass is recycled material. Framery Q is highly energy-efficient. When the products are in use, the standard power consumption of Framery Q is just under 12 W.

Framery wear parts (including gas lifts, leveling glides, LED lighting, electric parts, hinges and locks) are warranted. Regular maintenance will expand the lifespan of a single unit substantially. Maintenance includes regular service calls (tightening screws, adjusting hinges, etc.) and replacement of worn parts.

Framery Q: Input: 100–240 VAC, 6.0 A, 50–60 Hz /
Output VAC (table socket): 100–240 VAC, 5.6 A, 50–60 Hz
Optional USB Charging: Twin USB Fast charger (TUF) maximum combined output of 5A at 5V DC